![]() ![]() If I attempt to "Update Driver" from this properties screen, I am unable to locate any available drivers on the computer or on the disc. When I look at the properties it displays "The Drivers for this device are not installed. ![]() It shows up under "Other Devices>Simatic PC Adapter USB A2. I am able to see the MPI adapter in the Device Manager. It prompts me to restart the computer, computer restarts, still no drivers appear in the Device Manager. Now when I run the install program it finishes very quickly, approx 15 seconds. The first time I ran the driver install program it took approx 5 minutes to complete. Then I unistalled all Simatic Drivers from the Device Manager on the laptop and attempted to reinstall the drivers. I disconnected the laptop and then came back an hour later and was unable to establish communication to the PLC. I was able to establish communication to the PLC CPU and upload the program. (4) Siemens Step7 V5.2 and higher dont run with this operationing system (5) USB-communication is only possible with the special driver for Win NT (6) USB 2.0 is backward compatible to 1.1 (7) Cable is designed for direct connection to PC network card socket. I used the install disc to install drivers for the MPI adapter.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |